Products / CD- and UD-profiles / Attachments / CD 25

CD 25

Categories:

Allows for the construction of a suspended ceiling using CD profiles to an existing structure. Attached to the frame with screws from the side. In the ceiling plane, there are 7×20 mm oval openings, 4 mm holes, and ø 6 mm holes located outside the dimensions of the CD profile. There are double rows of holes arranged in a chess-pattern on the sides, allowing for easy adjustment of the ceiling height. Bending the ends from the desired location is very easy due to the grooves.

Add to enquiry page

Additional information

Pikkus (mm)	250
Pakis (tk)	100

Installation instructions

Walls and partitions - Wall connection to the floor and ceiling with VP, CD, and MP profiles

Walls and partitions - Wall renovation

Walls and partitions - Partition and exterior wall - Connection

Walls and partitions - Partition and exterior wall - Corner

Walls and partitions - Partition corner and internal partition connection - Partition corner

Walls and partitions - Partition corner and interior partition connection - Partition connection to the floor and ceiling

Walls and partitions - Partition connections - Partition connection at right angles and non-right angles

Walls and partition walls - Wall constructions - For dry rooms

Walls and partitions - Wall constructions - For damp rooms

Walls and partitions - Curved walls and openings - Curved walls

Walls and partitions - Curved walls and openings - Curved openings

Walls and partitions - Window jambs and door openings - Window jambs (solutions with MP, VP, and CD profiles)

Walls and partitions - Window jambs and door openings - Building doorways

Ceilings - Installation schemes with CD profiles - CD 60 profiles, with CD 12 CD 14 spacing clips and CD 02 locks

Ceilings - Installation schemes with CD profiles - CD 60 profiles, with CD 06N stiff hangers and CD 09 cross locks

Ceilings - Installation schemes with CD profiles - CD 60 profiles, CD 05 springs and with CD 02 locks

Ceilings - Installation schemes with CD profiles - CD 60 profiles, with CD 05C springs and CD 11 flush locks

Ceilings - Installation schemes with CD profiles - CD 60 profiles, with CD 12CD 14 spacing clamps and CD 15 cross clamps

Ceilings - Installation schemes with UA and CD profiles - UA 50 and CD 60 profiles without fire resistance requirements with 0.40 kN hangers

Ceilings - Installation schemes with UA and CD profiles - UA 50 and CD 60 profiles without fire resistance requirements with 0.50 kN hangers

Ceilings - Installation schemes with UA and CD profiles - UA 50 and CD 60 profiles with fire resistance from below and above with 0.40 kN hangers

Ceilings - Installation schemes with UA and CD profiles - UA 50 and CD 60 profiles with fire resistance from below and above with 0.50 kN hangers

Ceilings - Installation schemes with UA and CD profiles - With MP profiles

Recommended consumption norms and load-bearing capacity of profiles and fasteners

Related documents

Profiline product catalog 2024

Installation instructions for Profiline structures

Declaration of performance Sealing T3

Certificate ISO 9001:2015, ISO 14001:2015 (EST)

Certificate ISO 9001:2015, ISO 14001:2015 (ENG)

Alternative systems

Profilines’ vertical profiles are suitable for use as alternatives to several other products.

*The product is not available in Estonia or is only available by special order. To achieve a complete system from the manufacturer, contact the system provider.